1. Turn the device upside down and remove both rubber feet.
-
2. Unscrew the 4 screws from the larger section of the case and carefully remove it.
+
2. Unscrew the 2 screws from the smaller section of the case and carefully remove it.
3. Locate and remove the tape sealing the heatsink to the blowers.
#### Blower Removal
@@ 52,7 52,7 @@
17. Reattach the 2 small screws on the sides of the heatsink.
18. Return the blowers to their original positions and secure with their 6 screws.
19. Replace the sealing tape between the heatsink and blowers (if it's too damaged, electrical tape is fine).
-
20. Reattach the case cover and secure with the 4 screws. Start with the side opposite to where the screws are, it should be a tight fit, putting it in place it at an angle helps.
+
20. Reattach the case cover and secure with the 2 screws. Start with the side opposite to where the screws are, it should be a tight fit, putting it in place at an angle helps.